Skip to main content

Peer assessment overview

Overview​

A peer assessment assignment asks students to do two things: submit their own work, and assess the work of the peers in their pod, using a marking shell with ribs for each criterion and a short written feedback note.

Peer assessment builds on the standard assignment and marking tools you already use. What is different is that the assessing is done by students, and — if you enable the optional assess-the-assessor grade — each student can earn a second grade for how well they assessed their peers. Calibration — where assessors compare their placements against a teaching-team reference before assessing pod submissions — is optional for any peer assessment cycle, but recommended (see What students see, in order); you turn it on when you set the assignment up.

The two roles​

On a peer assessment assignment every student is both:

  • An author — they submit work and, later, read the feedback their pod gave them.
  • An assessor — they calibrate (if you turned it on for this cycle), then mark and give written feedback on each peer submission in their pod.

Students switch between their two roles from the assignment landing page.

The two grades​

Peer assessment always records a work grade, and can optionally record a second grade for assessing:

  1. The work grade — the grade for the submission the student authored, based on the marks their assessors gave it.
  2. The assess-the-assessor grade — an optional grade for the quality of the student's own assessing. When you enable it, TeachFront can grade each assessor automatically by how far their marks sat from the pod median (Autograde by distance from the pod median). By default this grade is scored against the same objectives as the work grade, but you can instead give it its own separate objective set.

Both grades appear in the gradebook like any other assignment. You choose whether to create the second, assess-the-assessor assignment — and whether it shares the work assignment's objectives or uses its own — when you set the peer assessment up.

What students see, in order​

  1. Calibrate — if you enabled calibration for this cycle. Study a Marked Example, place the band for each criterion, then reveal the gap between their placement and your instructor mark. Calibration is optional but recommended; if it's off for this cycle, students see no Calibration step at all and go straight to assessing.
  2. Assess — mark each peer submission in their pod, rib by rib, with a three-part written note per criterion.
  3. Pod gallery — see the pod's assessments side by side and name the pod.
  4. Discussion — discuss the assessments with the pod, using the built-in prompts.
  5. Self-assess and reflect — optionally revise their own marks after discussion, and send an end-of-round reflection to you.
  6. Results — once everything is assessed, students see their standing after you release feedback (see Monitor a peer assessment and share results) — results aren't shown automatically the moment assessing finishes.