Skip to main content

Complete a peer assessment

Overview​

On a peer assessment you have two roles: you are the author of your own submission, and an assessor of the work your pod members submitted. You switch between the two roles from the assignment landing page — look for the option to Switch between your two roles on this assignment.

You earn a grade for the work you submit, and — when your instructor turns it on — a second grade for how well you assess your peers.

1. Submit your work​

Submit your work like any other assignment. Your submission is what your pod members will assess.

2. Calibrate​

If your instructor turned on calibration for this cycle and set up at least one Example for Calibration placed on every objective the cycle shares, your assessing queue stays locked until you finish the calibration exercise — you will see Calibrate to unlock and Unlocks when you've assessed all your peers cues on the landing page. Calibration is optional, and when it does not apply to your cycle you'll go straight to assessing. Which of two things you see depends on why it does not apply. If your instructor did not turn calibration on for this cycle, there is no Calibration step on your landing page at all. If calibration is on for the cycle but there is no Example for Calibration ready for you — either because none has been added, or because the ones that exist are not placed on every objective the cycle shares — the step stays on the page and reads Unavailable for this cycle. It is not a button, there is nothing to open, and it does not hold your assessing queue shut.

Calibration walks you through the steps:

  1. Study the Marked Example — a piece of work your instructor added for you to practise on.
  2. Place the band for each criterion on your calibration shell.
  3. Reveal the gap between where you placed the band and the Instructor mark.

The instructor mark you are compared against is your instructor's own placement on that Marked Example — the same standard they set up the exercise with. You see it for every criterion the exercise covers, so the reveal always has something to compare your placement to.

When you finish, choose Go to your queue to start assessing.

3. Assess your pod​

For each peer submission, work through the marking shell one criterion (rib) at a time — for example, Assessment 1 of 3. For every criterion you:

  • Place the rib to show how the work measures against that criterion.
  • Write a short three-part note:
    • What's working — what comes closest to meeting this criterion.
    • What's not working yet — where the work falls short.
    • Actionable steps — the specific change that would move the work up a level.

When a submission is done, select Submit assessment and confirm — you will not be able to edit it afterwards, and your feedback becomes visible to that classmate. (The calibration exercise uses Commit ratings instead, because there is no classmate on the other end.) If your instructor made the cycle Anonymous, you assess without seeing who authored the work.

After assessing, open the pod gallery to see the pod's assessments together. You and your pod can Name your pod, and — where your instructor enabled it — use the anchors to flag a comment for discussion, such as I'm excited that…, I'm stuck on…, I'm still working through…, or A question I have is….

The gallery groups the pod's comments into a tab per objective, so you can read everything the pod said about one objective at a time instead of scrolling the whole page. Select an objective's tab to see just its comments, each with the assessor's proficiency level.

To take any comment into the discussion, select Discuss this on it. That opens a discussion thread already attached to that comment, so your pod can see what you are responding to.

5. Discussion​

If gallery discussion is on, join the pod discussion. Open a thread on any assessment and respond to your pod, following the prompts your instructor set. Your instructor may set a minimum number of replies, unique threads, or words for participation credit — a progress indicator shows where you stand.

When you arrive from Discuss this, the composer shows what you are replying to — the objective, who wrote it, and a short quote of their comment — above the box. Select the clear control on that line if you would rather post to the thread without pointing at a specific comment.

If you are not sure how to open, select Help starting. Pick a way to start offers a few shapes for a post — ask a clarifying question, suggest a specific improvement, point out what worked well, challenge an assumption, connect to the objective, or ask about their reasoning. Choosing one drops an opening sentence into the box for you to finish. They are starting points, not a script, and you can edit or delete the text like anything else you type.

6. Self-assess and reflect​

If your instructor allows it, you can revise your own marks after the discussion. You can also write an end-of-round reflection and send it to your instructor — you will see Reflection sent to your instructor once it goes through, and you can resend it if you change it.

When a reflection is ready for you to write, the pod gallery shows Reflect on this round. Selecting it returns you to the assignment's main page and takes you straight to the reflection, so you do not have to find it yourself.

7. Results​

Once everything is assessed, your results and any Instructor feedback (including feedback on how you assessed) appear after your instructor releases them — this isn't automatic the moment assessing finishes. If you think a mark on your work deserves another look and your instructor enabled it, you can Request reassessment with a note; its status shows as Pending review until your instructor marks it Approved or Declined.

Troubleshooting​

SituationWhat to try
My assessing queue is lockedThis only happens when your instructor has turned calibration on for this cycle — finish the calibration exercise first and the queue unlocks. Your queue only waits on the Marked Examples you are actually given, so there is nothing to finish that you cannot see. If calibration is off for this cycle, your queue is never locked this way.
The calibration exercise has fewer Marked Examples than I expectedYou are shown only the Marked Examples your instructor has placed on every objective the cycle shares. A Marked Example placed on some objectives but not all of them is not part of the exercise, and none of them hold your queue shut.
My landing page shows Calibration — Unavailable for this cycleCalibration is on for this cycle, but no Example for Calibration is ready for you — either none has been added, or the ones that exist are not placed on every objective the cycle shares. An Example for Marking never fills this gap, however fully it is placed, because you are graded on it. Nothing is waiting on you: the step is not a button and your assessing queue is not locked by it, so carry on to assessing. If calibration is off for the cycle instead, you will see no Calibration step at all.
I cannot see who I am assessingThe cycle is anonymous. Identities stay hidden within the pod by your instructor's choice.
I cannot revise my marksYou can revise your marks only when your instructor allows it, and only after the discussion step.
I don't see Reflect on this round in the pod galleryThe button only appears when there is a reflection waiting for you — that means your instructor set one up for this assignment and you have assessed every piece in your queue. Finish your queue first, and if it still doesn't appear, this cycle has no reflection.
The objective tabs in the gallery are missingTabs appear once the pod's assessments are in. If the gallery is empty, your pod may still be assessing.